HomeAdjustable Steel Prop
Adjustable Steel Prop
Adjustable steel props support slab and beam formwork during concrete work. Choose your finish, tube size, and letter stamping.
Adjustable steel props
| Part | Tube diameter | Finish |
|---|---|---|
| Outer tube | 48 / 56 / 60 mm | Hot-dip galvanized, painted or powder coated |
| Inner tube | 40 / 48 mm | Same as outer tube |
| Adjustment | Threaded collar with G-pin | - |
Closed and extended heights are made to order. Load data is issued with the quotation.
Steel Prop in Slab and Beam Support
An adjustable steel prop transfers vertical load from formwork to the ground. It supports slab and beam formwork until concrete reaches strength. The outer tube and inner tube telescope to the required height.
A steel prop works as a shoring prop or post shore. The threaded collar adjusts the height. A base plate and U-head plate spread load at each end. The prop is removed after the concrete cures.
Options: Finish, Tube Sizes, Letter Stamping
- Finish
- Hot-dip galvanized is standard. Painted or powder coated in red, orange, blue, or yellow is available.
- Tube sizes
- Outer tube 48, 56, or 60 mm. Inner tube 40 or 48 mm. Wall thickness 2.75, 3.0, or 3.2 mm.
- Letter stamping
- Your company mark can be stamped on the tube. This identifies your stock on site.
Get a quotation with matching dimension sheets
Send your bill of quantities or drawings. We reply within 24 hours.
- Made in our own plant, 100,000 m², founded 2016
- Hot-dip galvanized, painted or powder coated
- Reply within 24 hours